May 28 2009
How To Install Dish Network - The Simple Guide
The one question homeowners ask when acquiring their own satellite TV connection is - How to install dish network? Once the channels have been decided, the distributor chosen, and equipment bought, installation could be a pain. This article would be your guide on How to install dish network, and begin on your TV viewing.
Of course, before you install anything, you need to check out if your distributor offers free installation. If not, then you may need to ask a friend who has installed dish antenna, to assist you.
Conditions For Proper Viewing
For optimal viewing, this is what you should keep in mind when installing the dish antenna:
1. The association of homeowners should clear the installation. Many associations do not allow installations on the roof. Check with them before you start on the task of How to install dish network.
2. The dish is to be installed facing south. See if there are any possible signal blockers in that direction, like buildings, towers etc.
3. You need to check out the altitude and exact location with regard to latitude and longitude before installing. You could check this information online, and even on the company website.
4. In case you are not allowed to mount the satellite dish on the roof, you could have it installed inside your apartment.
Installing Dish Network
Before installing, you need the following components: satellite TV dish, satellite TV receiver and low noise block converter. You need as many receivers as the TV sets you have. Each receiver is connected to one TV set.
1. Once you have selected a spot for mounting, use the grips and nuts and bolts furnished to put up the satellite dish.
2. Connect the cable of the dish to the receiver. If you have multiple receivers, you need to connect all to the dish. You may need to drill if the cable has to run through walls.
3. Once the satellite dish and cables are connected, you need to connect the receivers to the TV.
4. Gently move the satellite dish up and down until the dish is at the optimum elevation level.
5. Fine tune for good viewing. Signals that have the strength of 60 or above make for good TV viewing.
With this guide on How to install dish network, you could now start on your dish TV viewing journey. If problems persist, it would be a good idea to call in a professional who could install the satellite dish for you.
